Drumstick Moringa Leaves Powder Making Machine

Introduction of Drumstick Leaves Powder Making Machine:

The drumstick Moringa leaves powder making machine is mainly suitable for grinding food, chemical materials and other materials, especially suitable for oily and viscous materials.The machine is widely used in food, pharmaceutical and chemical industries.All materials in contact with food in this machine are made of 304 stainless steel, reaching GMP standards.

Working principle of Drumstick Leaves Powder Making Machine:

The drumstick leaves powder making machine adopts a wind wheel type high-speed rotary cutting machine and a fixed cutting machine to pulverize, grind and shear the raw materials. With the strong air flow in the pulverizing chamber, the pulverized material can be directly discharged from the main grinding chamber, and the size of the finished particles can be achieved by changing the screen.

 

Advantages of Drumstick Leaves Powder Making Machine:

1.The gap between the rotor and the stator can be adjusted, as long as the gap between the rotor and the stator is precisely and properly, the effect of the machine can be optimized.

2.The whole structure of the drumstick leaves powder making machine adopts a quick-disconnect structure, which is convenient for quick and easy disassembly and cleaning.

3.The drumstick leaves powder making machine can be equipped with a cyclone separator and a dust remover. There is no dust flying during the production process, and the trapping bag can effectively trap the dust in the airflow. At the same time, the fine powder intercepted by the dust collection bag can be effectively recovered and the loss rate of the material can be reduced.

4.The drumstick leaves powder making machine is made of stainless steel and has strong wear and corrosion resistance. It is suitable for processing advanced and corrosive materials.

Operation notes of Drumstick Leaves Powder Making Machine:

1.When the drumstick leaves powder making machine is turned on, if it encounters the pulverized material and the blade is stuck, so that the motor can not operate normally, it is necessary to turn off the power immediately to prevent the motor from being damaged and to work again after cleaning.

2.This machine can't work continuously for a long time. When the number of processing is large, the middle must rest to prevent motor damage caused by overheating of the motor bearings.

3.The front cover of the machine must be opened after the machine is stopped, which is convenient for cleaning the inner cavity of the machine and ensuring the cleanliness of the working face of the machine.

4.After prolonged use, the carbon brushes and blades are severely worn and must be replaced.

 

Our service for Drumstick Leaves Powder Making Machine:

1.One year warranty for failures caused by machine quality.

2.Faults caused by incorrect operation, human problems, etc. will be responsible to the customer. We will help solve the problem through professional guidance on email or video.