How many maintain the peanut peeling machine

Peanuts peeling machine mainly used to remove the res skin of peanuts. The peanut skin peeler machine is mainly made of rolling and peeling. It has the characteristics of stable and reliable performance, long service life, good peeling effect and good quality. It is suitable for processing all kinds of peanuts. It is one of the tools that have contributed greatly to the development of agriculture. How should we maintain it in order to prolong its life?

(1)The desquamation machine is conveyer with a triangular belt. After being used for a period of time, the new belt will gradually extend and relax due to the pulling force. Therefore, it is necessary to regularly check the tightness of the driving belt and the clearance between the mating parts, so as to make timely adjustment.

(2)During the operation, we should pay attention to the speed, sound and temperature of the machine. Take off a variety or a day job is completed, should be down to check whether all the bearing overheating, fastening screws, key pin parts is loose, if loose fastening should be found at any time, especially high speed parts, such as: the fan blade, especially the fan blade is worn or broken, reinforcing plate whether the blade wear or external deformation, if found to timely repair or replacement.

(3)The bearings of the sifter shaft and all the live joints should be checked in time. After each operation, the sieve bottom of the rubbing machine, that is, in the hole seam of the fish scale plate, is regularly cleaned with a steel wire brush.

In addition, it is important to pay attention to a large inspection of the machine after the finishing season of the peanut peeling machine. Check the bearing movement1, check whether there is a sieve bottom wear deformation or crack inspection and separating sieve. After the inspection, repair the damaged part and remove the dirt and residual peanuts in the machine.